"C_LjeRhhI1abw": { "on": "visible", "vars": { "event_name": "conversion", "value": 1.0, "currency": "EUR", "send_to": ["AW-11284232007/1xBRCPji57kaEMfu3oQq"] } }
top of page
Screenshot 2025-05-21 5.53.54 PM.png
In case of this type of solenoid valve
Screenshot 2025-01-31 13.55.51.png
Screenshot 2025-01-31 13.57.08.png
IMPORTANT: The message 'Low level detected' will only appear after a first filling after which the level has not been reached.
Simply holding the detector out of the water will not generate a low level message.
Screenshot 2025-01-31 14.04.52.png
IMPORTANT TO KNOW:
When a command is given to 'force fill during 30 min' for example, the valve will only activate when the POOL LEVEL module synchronizes with the server (each 2 to 3 minutes). So it can take up to 3 minutes befores it activates, this is normal (don't expect instant action)

During installation via the Bluematic app:
 
When installing the normal POOL LEVEL!​























 
Only choose 'YES' when asked to connect a water level sensor when you bought a POOL LEVEL Retrofit solution (with 2 separate 9V modules)
 
​
​
​
​
​
 
 
 
 
 
 
 
 
​



 
Screenshot 2025-06-30 6.03.34 PM.png
Screenshot 2025-06-30 6.01.54 PM.png
bottom of page