top of page
Download the Bluematic app
Open the app and create a new account
Some tips & tricks!
* Install on your own mobile phone
* Ask for the customer's email address to create the account
(no verification needed)
* Set a standard password yourself (e.g. 123456)
* Transfer everything to the customer according to your own insight (after payment, delivery, etc.)
*The customer can change his password at any time.
​
Please fill in the requested details of the pool(The information is for informational purposes only and has no impact on operation)
Connecting the LoRa antenna
Would you like to install
the LR-MB
communicationrelay?
Yes
No
Screw the antenna in and plug in the tranformator in a 220V socket.
The module will become visible in the app.
If the LRMB module is not visible, you must adjust the Bluetooth settings of your cell phone to make external devices visible
Red/green flashing: Downloading update in progress (may take a while)
Green flashing: Home WiFi password incorrect
Check if the LED turns green
Next
(Go to the technical room where the Pool Command is installed)
Installing the pool command
Stop installation
Install next module
Connected pool timer
Select 'Install module'
and
choose 'Connected clock'
The module will appear (the PoolCmmand) and must, of course, receive a 220V power supply.
Click the link and follow the procedure as it appears on the screen.
'Have you connected all the equipment?' Yes
'Select the circulation pump' Select the brand of pump you are using.
Select AUX 1 and then AUX 2.
Note! When you select AUX 1, you immediately have the option to select AUX 2. (If you click twice in succession, you have selected AUX 1 and 2 as the same.)
AUX 1: e.g., Heat pump
AUX 2: e.g., Lighting or backwash
(The menus in Bluematic will adapt to these choices.)
'Select the temperature sensor' Always select the first one in the list.
'Do you have a roller shutter with a shutter switch?' Here you can connect a dry contact to the roller shutter position (open or closed). This contact must also be connected to the roller shutter control (as NO or NC).
The installation is complete and will connect to the LoRa network.
bottom of page