top of page
How to connect any heatpump?
Configure AUX 1 or AUX 2 as 'Heatpump'
Connect 2 wires (dry contact) from the AUX 1 or AUX 2 location on the PoolCommand to the flow contact of the heatpump (is present on all Blue+ heatpumps apart from Nova and Nexus)
If no flow contact is available, follow procedure underneath...
On the Blue+ Nova heatpump this has to be connected on the motherboard. In place of the bridge on position CN13
On the Blue+ Nexus heatpump this has to be connected on the motherboard. In place of the bridge on position CN16
bottom of page