top of page
User manual EN-FR-NL-DE-ES-CZ
When configuring lights in Bluematic on PoolCommand, choose 'others'
You will be able to switch color by clicking on 'Change color' in Bluematic.
If you want to use the color wheel you will need to open the Relightable app.
In the future we will forsee a 'Relightable' option when configuring lights in PoolCommand. When choosing lights in Bluematic, this will automatically open the Relightable app.
Android
Relightable app settings Android
Approx 1 minute after powering up, form the infinity sign on the screen...
The RL-CTRL config button willa appear on the screen
Click on this button
Put the slider on 'BLE' choose the detected module, click on 'Scan & Connect'
Slider 'On/Off Switch (EXT IN): If you want to use external contact to switch the lights ON/OFF
Slider 'Wifi: If you want to control the app via WiFi (only possible if on same Wifi as the controller)
Slider 'DMX': If you want to use DMX functionality
Slider 'Modbus': If you want to use the modbus protocol
Slider 'RS-485': If you want to communicate mobus over RS485
Slider 'Matter': If you want to use the Matter communication protocol (over WiFi) - not available yet
Slider 'Color type (RGB or WWW): Activate RGB or white LED's
Slider 'White Zone Mode': Activate to choose for 3-zone white mapping
Slider 'I/O Type (active or passive): Activate if you use anexternal switch
Slider 'Mode (switch or button)': Activate if you use an pulse switch
Slider 'Logic (normal or inverted)': Activate to inverse the logic of the switch (ON becomes OFF)
After each modification, click on 'Write config' to save the modifications to the module
IOS
Approx 1 minute after powering up, click on 'Configure new device' for first install or choose from device list when already configured.
Click on the module that appears
Slider 'On/Off': If you want to use external contact to switch the lights ON/OFF
Slider 'Wifi: If you want to control the app via WiFi (only possible if on same Wifi as the controller)
Slider 'Active': Activate if you use an pulse switch
Slider 'Inverse': If you want to use the modbus protocol
Slider 'Dry contact': Activate if you use an pulse switch
Slider 'Toggle': ...
Slider 'RGB' 'www': Choose for RGB or white
Slider 'Power':...
Color Mode: Choose how the LED's are activated (glow, color,...)
Choose a name for the device
Fill in WiFi SSID and password
bottom of page